Jump to content

rusty1

Silver Member
  • Content count

    727
  • Joined

  • Last visited

  • Days Won

    1

rusty1 last won the day on April 9 2015

rusty1 had the most liked content!

Community Reputation

1 Neutral

About rusty1

  • Rank
    Silver Member

Contact Methods

  • Website URL
    http://

General Info

  • Gender
    Male
  • Car Type
    Nissan Silvia
  • Car Model
    nissan 200sx S15
  • Occupation
    SELF EMPLOYED
  1. Misfire - Plug Colour

    Yes, It's a common colour if you use octane booster or injector cleaner..rust red..
  2. Misfire - Plug Colour

    Yes pretty lean colour...have you used an injector cleaner or octane booster recently
  3. Do make sure you use new injector rings when you put them back in, definitely need a new rocker gasket, that's what is on your inlet runners, oil,. Clean your plenum with carby cleaner and your IACC valve ..Just a tip, don't use it on you throttle body butterfly valve, it has a special non stick treatment on the edges and you will take that off which will cause it to stick...Repace all those old vacuum lines..
  4. Were you heal toeing with the down shifting ?
  5. You will need to bash the tunnel to fit the Z33 and the gear shift hole will need to be cut
  6. S15 Cradle movement?

    Have you looked at the drive shafts centre bearing
  7. Turbo to manifold gasket is a common issue...Ive replaced mine 4 times over the years Turbo to manifold gasket is a common issue...Ive replaced mine 4 times over the years
  8. 17x8 +30 will not rub the strut, you can put a 235 on them safely, as for rear 17x8 +35 or 17x9 are good for the rear
  9. WTB: Yellow S15 boot WITHOUT holes

    You could try these guys, the feedback Ive got about them has been excellent to deal with.... http://www.shamrockspares.com.au/
  10. yep this. go do some really easy calculations and use this website ! it even has all the inputs that you just plug in to give you the answer you seek !! http://www.carbibles..._bible_pg4.html 8"+30ish on the front will sit with stock guards 9"+38 on rear will sit with stock guards - may need a slight lip. This is what I have in 18" on mine, +30x 8 F and +38x9 R, sit flush with the guards with 235 on F and 245 R
  11. PROJECT MU BRAKE PADS

    Yeah the DBA 4000 slotted are very good all round rotors, never had any issues with street and occasional track days
  12. Let's Talk Brake Pads!

    Apart from good pads two of the best things I did to improve braking durability on the track was remove backing plates and install air ducting guides, brought my braking temperatures down significantly....
  13. Let's Talk Brake Pads!

    My favourite pad now as well for street and track the Project Mu HC+ and after 12 years of S15 ownership I have used a lot of different pads, Bendix Ultimates, Hawk, Ferodo DS2500, Endless CC-X, Mu B Spec's and Endless CCR's...The HC+ are my choice for Track and street...
  14. From memory, plug and play, the auto ECU is a piggy back ECU attached to the larger ECU, just plug your manual ECU loom into the unit as you wont have the Auto loom, you should be able to remove the piggy back auto ECU of the main ECU
  15. BOV install on an S15

    The problem is it not recirculating the measured returned air so the computer says overfuel to protect the motor..While you run a stock MAF if you don't recirculate the vented air it will run like a dog
×